المدة الزمنية 23:15

Replacing Xenon HID Headlamps in 2015 Jeep Grand Cherokee

بواسطة Joe's Garage
52 061 مشاهدة
0
375
تم نشره في 2022/02/18

In this video, we identify the root cause of a headlamp issue in a 2015 Jeep Grand Cherokee with Xenon HID bulbs. Is the problem a bad ballast or a bad headlamp? There's a relatively easy way to find out... 2-pack OSRAM XENARC head lamps: https://amzn.to/3v0nH1w My cousin's channel: /channel/UC8LwUf0B40wo_YaxCclxRrw

الفئة

عرض المزيد

تعليقات - 50
  • @
    @wesleydale1099قبل 5 أشهر This method was so much better than all others I have seen so thank you for the great explanation. Jeep quoted $600+ to replace 1 side… Amazon has a 2 pack OEM bulbs for $120 at the time of writing this so this likely saved me $1000+. One thing I noticed, my model has the 66340HBI bulbs (high beams?). The link in the description is for 66340 bulbs, so just make sure you replace like for like (whoever might be reading this). ....وسعت 1
  • @
    @jacu3046منذ 2 سنوات I referred to your video 2 times during my surgery. Mine was successful because of your sharing, thank you. I will add that it appears that the "tabs" id="hidden2" class="buttons"> on either side may be a locking ring, the tabs are spaced 180 degrees apart. It also appeared that the whole bulb is keyed, so straight in straight out. Very thankful for your video ! ....وسعت 3
  • @
    @user-lh4lg1ki8nقبل 9 أشهر Thanks a lot. In My first attempt I gave up. I didn’t know whether to turn the bulb unit or not. I tried many times I couldn’t . In many other videos, they said you should turn it counterclockwise but it didn’t work for me. In this 2015 model, it appears it has a clip or lever that I didn’t know but watching this video and listening to the detailed explanation I found the way around it and finally replace it. ....وسعت 2
  • @
    @OriginalStevenMalibuمنذ 2 سنوات I remember how easy it was to change the bulb on my '85 Nissan. These days manufacturers make it next to impossible just to get you in their Service id="hidden4" class="buttons"> Department. Thanks for the video, my 2014 bulb just went out. A little bit of a headache and a few scratchesn but it will save me a couple hundreds bucks. Very helpful good sir! ....وسعت 4
  • @
    @whoiscoughingnow6400قبل 7 أشهر Thanks for this video! Replaced the driver's side this afternoon and wouldn't have been able to do it without your video. I'll let you know how it goes when it's time to do the passenger side.
  • @
    @jimpyron8255قبل 8 أشهر Thanks for doing this video, i would have eventually figured it out but your video shortened the job for sure! Replaced both and hope to get another 8 years!
  • @
    @koryyyyقبل 3 أشهر Thanks for the video! it saves me a lot of time and broken pins and stuff :D
  • @
    @billkuli9837قبل 8 أشهر By far the best video for a the cherokee. Thank you so much
  • @
    @slodays1158قبل 8 أشهر Very helpful thanks. Not done but going to find the bulbs tomorrow and replace them both.
  • @
    @shantiza33قبل 7 أشهر I love the video and details. Thank you. I’m going. To get my keep serviced for a few other reasons and will also ask them to change this bulb for me. Praying they give me a discount since I’ll be getting many things done!
  • @
    @Stefan15957العام الماضي Ugg. Thanks for this video man! Going to make this alot easier! All of this just to change a headlight bulb LOL. 2
  • @
    @jessiereyes7606قبل 10 أشهر Thank you Sir your video was truly lost of help I really do appreciate it..I didn't know how that kind of bulb comes off now I know it's got a clip..
  • @
    @failingup4907منذ 2 سنوات I took one of my bulbs out and the wire holding it was so short I didn't want to take it off. I wanted to replace them with 6000 k LEDS. I'm trying id="hidden9" class="buttons"> to get it back in, but I'm having a hard time doing it. How did you get yours back in? There are like metal prongs sticking out from inside the headlight housing. Its weird. Do you push it thru the metal prongs or does it just sit on them? ....وسعت 3
  • @
    @lizvizمنذ 2 سنوات Hi Joe I watched your video with my BIL and he was able to change the lights, but they are pointed outwards on both sides at night. Can you explain how id="hidden10" class="buttons"> the bulbs are taken out and go in? I am going to attempt this myself. Any help is appreciated. No videos explain how the bulb pops back in. Do you have to adjust them? Thank you. Liz ....وسعت 2
  • @
    @sheerwillsurvival2064منذ 2 سنوات I learned the hard way don’t get hand oil on bulb or it will burn out most quickly I wear gloves now when doing those bulbs 3
  • @
    @FiveCentsPleaseمنذ 2 سنوات This was helpful, thank you. I strongly suggest that the VERY FIRST thing that you do is go to UConnect->Settings->Lights and turn EVERYTHING off id="hidden11" class="buttons"> or set to zero. And turn the headlight switch to OFF. (Unless you plan to disconnect the battery.) If the new bulbs activate while you are attempting to insert them, you are either going to A) Burn your fingers or B) the bulb will melt any plastic that it touches. So you will end up scraping a few bits of plastic off of the bulb with a fingernail and praying that you didn't just ruin it. (I gently cleaned the bulb just in case.) You can test the lights as you go. The next suggestion is when replacing the lower air box, the upper air intake is actually a separate piece. Remove it and it is easier to get the lower box into position and reconnect the intake just before you push the lower box back onto the pegs. This was much faster. I was able to purchase the correct Osram 66340HBI bulbs from Amazon for a decent price. The seller appeared to be registered as an importer from Europe, so in the least I am a little more confident that I didn't get Chinese knockoffs. Lastly, I like the Grand Cherokee, but this is the most poorly engineered headlight arrangement that I have ever seen. ....وسعت 10
  • @
    @OrthodoxFishingDADقبل 3 أشهر Good day to you sir, to start I love your presentations. If you have a moment I'd like to ask a question for what I'm going through. I just want id="hidden12" class="buttons"> different opinions to my subject matter. I have GC Overkand 2018.. my problem recently is that my passenger side headlamps got some water inside ( weird because I only expect the driver side to go bad since the LeD rim the DDL (DAYTIME DRIVING LIGHT) is showing yellow color but slightly. Anyway my question is how do you think I should deal with the LED DDĹ is flickering. It stated first that my front right side signal not working. That was annoying but after several hundred miles of driving it started to work and the message disappeared. Yet when I have the vehicle light switch to Auto for the daytime driving light to be on it flickers that portion if the headlamp led. Here's the kicker.. if I have it on full auto or fully active both driving lights and ddl on for night driving no flicker! Yet if I switch to just ddl function if flickers! How should I troubleshoot? Does buying a new assembly will include the led portion of the ddl?- I noticed in your video that when your bad bulb was inserted your DDL lens flickerd too! My bulb is fine no distortion.. just confused.. and like you said.. I don't want to start throwing money at this problem just as yet.. Thank you in advanced for any input from you ! ....وسعت
  • @
    @Venicebeachvidsمنذ 2 سنوات Thank you. I’m having exact issue with drivers side bulb. 2
  • @
    @nychost2372منذ 2 سنوات very helpful - i have a diffent problem - my head lamp is fine but my LED and the indicator isnt working. The cover glass also looks slightly gray compare to passenger side
  • @
    @maicodarbelالعام الماضي Thank you vert much you save me a lot of time and money!! 1
  • @
    @supratikdas1518منذ 2 سنوات That's awesome. I went as far as taking the cap out but just couldnot turn the old bulb to pop out of the case. M i doing anything wrong? It just won't turn :) Thanks.
  • @
    @Jojo_Al.23قبل 10 أشهر I would like to upgrade to the same headlight you have,but my question: Where did you get yours from, and how much did you pay for them and the installation?
    Thank you!
  • @
    @brent5306قبل 9 أشهر worked. What a PITA. Thanks for the video!
  • @
    @DrunknOdinالعام الماضي Great video. Helped a bunch but unfortunately now my front turn signal stopped working. Anyone know how to repair thay or do i have to change out the entire lamp? Cant seem to find anything on this. Thanks again.
  • @
    @phxroadracerالعام الماضي One of my bulbs went out. I read recommendations that you should change both so I did. Now, both bulbs are on, but my headlights are really dim and "dispersed" id="hidden17" class="buttons"> is the best word I can use to describe. And they're not any better when I turn on my brights, maybe even worse. It appears that the deflector that focuses the light and switches from dims to brights isn't work. My headlights don't do the autoleveling when you first start up the jeep. HELP!! Does anyone know if/how to reset the deflector? I have AlfaOBD if there is a way to troubleshoot and/or reset. Thanks, Craig ....وسعت
  • @
    @CS-df8pgقبل 5 أشهر Great video, very thorough and helpful. I still had some trouble with the "clips" but found another video that described it better as a "locking id="hidden18" class="buttons"> ring" that needs to be twisted counterclockwise before you can remove the bulb assembly. To see what the ring looks like check out "Jeep Grand Cherokee HID how to replace headlight bulb. 4th gen 2011 -2021" by Friendly Mechanic ....وسعت 1
  • @
    @azizaladwani000منذ 2 سنوات Hello my friend you have a problem with my Jeep Grand Cherokee with the lights the daytime light is not working Do you have a solution to this problem only from the pasenger side
  • @
    @index6738منذ 2 سنوات Starter is working as it is discharging to ignite gas in bulb. Lamp tube itself has air gap. No continuous wire elements. Can’t measure lamp for continuity . Basically High voltage Arc discharges to ignites gas in bulb of tube. ....وسعت 1
  • @
    @martinbjel8974منذ 2 سنوات The access from the inner wheel well is for people with tiny hands. On my diesel Wk2 I also had to remove the air box on driver side and ecu on passenger id="hidden21" class="buttons"> side to access the headlights. The retention rings on bulbs themselves are a bit tight because there isn't enough leverage but its good that they are fixed in the housing. I found it was unable to attach the plug when the light was installed because there wasn't enough room. When you attach the plug first you have to summon a bit of your Operation! skillset not to bang the bulb about too much since there is a lot less range of motion. In my case one of the airbox clips vanished when removing the box so be careful as they are about $5 shipped each. ....وسعت
  • @
    @miguelrosales3710منذ 2 سنوات Do these bulbs light up the road the same as the oem ones??
  • @
    @JimmyS1981قبل 8 أشهر Does anyone know if there is a fix for a partially lit Diode in my driver side LED day-time running light. This is the part that is ] shaped and wraps around the headlight housing.
  • @
    @bubbafatas2588منذ 2 سنوات You should remove bumper to replace bulbs! Its not difficult and you risk destroying the bulb doing it this way! The HID bulb has an external wire running id="hidden23" class="buttons"> the length of bulb that you can easily bend or break trying to get it in! You wont know if its damaged until it blows out soon! ....وسعت 1
  • @
    @gharibbarznji3390منذ 2 سنوات I have same issue with my grand cherokee limited 2019 , but my vehicle two lights turn off
  • @
    @1013VSالعام الماضي Got a 2017 , with the same headlight design. Anyone help me on figuring out why my passenger side led drl is flickering, any remedies.
  • @
    @Quezztionnمنذ 2 سنوات Hi i have questio i have a jeep grand cherokee 2016 same headlamps you got in there im trying to put brand new bulbs in there because mines are already id="hidden24" class="buttons"> not that bright the fog lights are brighter than my headlights. So the new bulbs you bought is a halogen? Im planning to put led lights u think it will work? Thanks ....وسعت
  • @
    @carynboyer7307منذ 2 سنوات Do you know why one of my rim lights is purplish and one is yellowish but both round bulbs are the same color, yellowish tint? Only one rim of lights is showing purplish tint.
  • @
    @christiansantos5006منذ 2 سنوات I think it's much easier to take off the front bumper than struggling to put your hand in there lol 2
  • @
    @lawrencebethea7959قبل 7 أشهر Thank you very much, very helpful video. Still very, very hard to do if you have big hands!!!!
  • @
    @frekkledippedقبل 8 أشهر Good vid I watched another one partially first and it sucked
  • @
    @link9alink9a71منذ 2 سنوات German getting worse then Chinese brain.
  • @
    @mattp9029قبل 5 أشهر freaking jeep. JFC man. Can they make shit anymore complicated?
  • @
    @abigoldz5456منذ 2 سنوات Hi there. The new Osram bulbs gives the same color as the Osram factory bulbs?